Posts Tagged ‘Radiant Heat’

Geothermal Heating – Renewable Energy That Can Save You 70% And Thousands On Heating

February 13th, 2010

Many of you are feeling the burden of high energy bills this heating or cooling season, which will leave you to wonder, is there something I can do about this? Heating costs are still climbing and are more volatile than ever. But there is a way to save 70% on your heating and cooling bill with technology that has efficiencies of 300-500%. Only one heating technology is able to achieve those kinds of numbers, and that is by using geothermal heating.

Geothermal heating (aka Ground Source Heat Pumps, GSHP’s, Geothermal Heat Pumps, Geoexchange, etc.) is basically a method of heating and cooling a building that pumps heat from the earth, into your home. To understand how that works, you have to understand how a heat pump works. Every one of you has a heat pump in one form or another in your home, weather it be a refrigerator, air conditioner, or air source heat pump. All a heat pump does is take heat from one place, put it through a refrigerant cycle, and move it to another place. A refrigerator takes heat from inside the refrigerator, and pumps it outside to the heat sink, which is the refrigerant coils on the back of the unit. GSHP’s work the same way, except the heat sink for the unit is a large ground loop buried in the earth. A liquid is circulated through the ground loop, and as that liquid moves, it absorbs the heat from the large thermal mass of earth. That temperature of earth is about 45-55 degrees F beneath the frost line all year round, so the heat pump runs great in the most extreme temperature situations. The circulated liquid is then put through the heat pump, which uses a refrigerant cycle to deliver the heat to your home’s distribution system, which can be either forced air or radiant heat.

Geothermal Heating has many advantages over a conventional system, with the biggest being a huge energy savings of 50-70% on heating and cooling bills. The heat pumps are extremely efficient with a COP (Coefficient of Performance) ranging from 3-5 (300-500% efficient), release no green house gasses, and don’t need to burn any heating fuel. They also run quietly, are very reliable, heat and cool with the same unit, and can generate a significant portion of your domestic hot water need, just as a byproduct of normal operation.

These amazing systems have always come with the stigma of a very high initial installation cost, which is somewhat true. A geothermal system will cost you more to install in your house than a conventional system, but there are a few huge factors that completely change this picture. The first is the amazing energy savings. A geothermal system will save you 70% on your heating and cooling bill during the year, which is thousands of dollars straight to your pocket. With winter heating costs in Northern climates reaching all time highs, while being very volatile, you can’t afford not to have a geothermal heating system.

The second is massive federal, state and utility company incentives. The federal government is currently offering a 30% federal tax credit towards the installation cost of a ground source heat pump system, which greatly offsets the cost to the owner. Most states also have significant incentives, and they can all be found on http://www.dsireusa.org. The federal government also has great, low-rate renewable energy loans, which take out the massive initial cost of a geothermal system.

Is earth4energy scam? Find out the true |earth4energy review| on http://www.squidoo.com/earth4energyscamrevealed. Best |earth4energy review| available on the internet. Click here to find more about |earth4energy review|

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , ,

How Does Solar Energy Work And What The Costs Are

January 20th, 2010

Discover how solar energy works in order to reduce your utility bill and to save your environment.

Definition of solar energy and the method of its generation

Solar energy will be defined as the method of reworking naturally received daylight into machine power, chemical power and electrical currents. In other words, the method of storing and using the radiant energy of the sun is termed solar energy. Different technologies and devices related to solar energy are used to convert daylight into mechanical and chemical power, and electricity. Chief among these devices are water pumps, solar chimneys, photovoltaic cells and solar thermal equipments. In case you are thinking how precisely solar energy works, we tend to would be addressing precisely that issue in this article.

Varieties of solar techniques and the large power contained therein

How does solar energy work? This question can not be satisfactorily answered till the application strategies, regeneration and final usage of solar energy are considered. Experts contemplate solar energy as the most effective source of natural and renewable energy. Now, when electromagnetic waves from daylight enter the world’s atmosphere (at high altitude levels), around seventy percent goes straight to the sky, via reflection. The remaining thirty per cent is absorbed in the shape of radiant heat by the clouds within the sky and the water bodies and landmass on the earth. This radiant heat so trapped is currently converted, using machines, to electric current and/or mechanical and chemical power. Whereas it is clear that around ninety nine per cent of the total stock of renewable energy sources on earth comes from the sun, the strategy of its operating will be customized to suit specific desires, and also crucially depends on the efficiency of the usage of solar power by the solar energy techniques. Solar energy is demanded for a variety of reasons, which embody domestic cooking, running vehicles, architectural purposes and urban planning.

While it’s almost not possible to place a finger on the precise means in that solar energy work (and hence, the associated tools and mediums) without knowing the character of service it is meant to supply, a broad classification of the solar energy will still be made. Solar technologies are generally of 2 types. Firstly, in active solar techniques, different tools are used on the fields in order to faucet in the sunlight directly. Devices like fans are used to generate electric currents, whereas photovoltaic cells are used to generate heat and warmth. Pumps are used to provide mechanical power from solar energy. On the opposite hand, passive solar technologies are additional concerned with using the sun rays directly, and do not involve any conversion processes. Buildings are constructed in places well-illuminated by sunlight. This technique is, hence, helpful for urban planning. So, whole active solar techniques are out to maximise the number of daylight received by the various tools and devices, passive solar techniques aim at establishing solar power as the only usable energy resource on earth. A look at the richly varied fields where solar power finds application will convince us that this supply of energy is indeed extraordinarily important in our daily lives, and value all the attention that it gets. Solar energy sometimes finds usage in generation of electrical power, urban designing, agricultural needs, design, disinfection and desalination needs, cooking at home, and in solar lights, apart from a host of alternative application domains.

How much do we have a tendency to gain by using solar energy?

The professionals and cons of using solar power should be properly listed, so as to make an plan of the methodology of its working. Solar energy is abundant, free and a renewable source of power. As such, it scores over most different competing sources of energy. Usage of solar energy additionally will not release in any pollution affecting earth’s atmosphere. The same cannot be said of the conventional fossil fuel energy sources, which released green house gases in the air, greatly polluting the latter, and additionally resulting in aiding the global warming process. Solar energy will conjointly generate enough power to run cars and even satellites. But, there are certain limiting options to the usage of solar energy as a source of power. Solar energy plants can perform well solely in areas that have continuous and robust sun rays all round the year. Hence, these plants have remained limited to only the sun-bathed parts of the world. A solar power system, set up at an area that receives irregular sunlight would fail to produce the required output. Considering the rather high prices of putting in a solar energy plant, a system at such a place can’t be economically sustained either. Researchers are, however, making an attempt to work around these problems. The overall view is that almost all houses would have converters that run on solar power, within the foreseeable future. The cleanliness of the world’s atmosphere would also get a much needed boost.

Users should ideally take help from a reference manual to learn how to install the solar power plant. Usually, info on the simplest place to install the system, the method to accumulate other components at low-cost costs and how to induce the batteries free conjointly need to be known. How the wiring is to be done plus the required safety tips are sure things you need to know. Indeed, a well-documented reference manual can ease the process of putting in a solar power system.

To learn how to earth 4 energy, visit this site: energy 2 green. Learn the secrets to getting your ex back into your arms…. Go to self made solar energy today!

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , ,

Pellet Stove Dealers And Carbon Dioxide Plus Straw Pellets

December 25th, 2009

Choosing the right pellet stove for you can be a tricky company, it depends on so many factors from your required heat output for the size of property, to how automated you necessitate the stove to be. Heating outputs from pellet stoves collection fro heating mobile homes up to large houses as well as businesses. The stove can either provide purely hot air into the room along with radiant heat, though some pellet stove also have integrated back boilers to connect up to existing central heating systems. For large properties pellet boilers maybe used to provide the main source of heat. Though a pellet stove can also provide an attractive central feature to a room. When discussing your requirements by way of pellet stove dealers, make sure you cover some key areas. This include stating the square footage that you necessitate to heat, in addition to where the stove is to be positioned. These factors along with more are crucial when purchasing a pellet stove.

Learn more about Pellet Stove Dealers

Most pellet stove dealers will only sell as well as recommend premium wood pellet fuel. Premium wood pellet fuel is the highest grade as well as most expensive from of pellet energy heating. The advantages of premium pellet fuel is the ultra low ash content, which technique pellet stove maintenance is at an absolute minimum. Yet as the pellet stove market grows, along with only certain types of biomass can be used for premium biomass pellet energy, prices will enlarge. However many other wood materials can be processed into energy pellets, and these biomass resources in many cases can be found increasing locally, in addition to in many cases are even still regarded as wastes. For case at PelHeat we make plus use straw pellet fuels. Straw pellets are constructed from waste wheat as well as barley straw left from food crop construction. Using the straw to manufacture fuel pellets way a dual revenue for a single crop, as well as does not confuse food by way of fuel. Only certain designs of pellet stove can use biomass fuel pellets, such as straw pellets. This guide will provide you with the information you call for to ask your stove dealer.

Read more about Pellets Stoves

There are exact designs of pellet stoves to choose to be able to burn wood energy pellets such as straw pellet along with grass pellets. Straw as well as grass pellets can be as much as half the cost of wood pellets, so there are precise compensation. On the other hand straw along with grass pellets also generate more ash compared to biomass pellets, along with some pellet stoves cannot deal by means of the increased percentage of ash effectively. Also there is a possibility for grass as well as straw pellets for manufacture small clinker formations, similar to coal clinkers. Corrosion is also more of a concern. Yet by way of the correct stove design, there are pellets stoves on sale which can used straw plus grass pellets effectively, saving their owners hundreds each year in their pellet energy costs.

More information on Pellet Furnaces

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , ,

Wood Heater Boilers Is An Advancing Of The Traditional Wood Stove

October 23rd, 2009

It’s not a secret that wood boilers take the idea of the traditional wood stove and improve on it, solving some problems inherent in wood burning and making wood a clean, safe, and efficient source of heat. It’s common knowledge that wood stoves have been used evermore ; a very famous American, Benjamin Franklin, invented the Franklin stove in the 1700s as a safe alternative to fireplaces, which were dangerous – likely to catch the mainly wooden homes standard back then on fire – and not particularly efficient. As you may know, the stove provided radiant heat in a relatively safe manner compared to the open fires of fireplaces.

In fact, while wood stoves were supplanted by central heating decades ago in urban and suburban environments, in the country many people continue to heat their homes, as well as cook their meals, partly or entirely with wood. But problems, as far as this issue is concerned, remain in the use of wood as a fuel; while a properly kept going and operated wood stove is relatively safe, the build-up of creosote in stove pipes and chimneys can still result in dangerous fires. By the way, another problem is time. Beyond any doubt, in an era when at least one person in the family spent the major part of the time at home, feeding a hungry wood stove was not a big problem; now, however, with adults working outside the home at least forty hours a week, if not more, having a fire go out means coming home to a cold house and, in extremely cold weather, dealing with the possibility of frozen and burst pipes. Also, as a matter of fact, walking away from a house with an active fire burning in the wood stove doesn’t necessarily inspire a lot of peace of mind.

In fact, designed to burn cleanly, with a minimum of creosote build-up, a boiler can be loaded with enough wood to burn for hours without having to replenish the wood supply. It is very important to take into account that the boiler, which can be placed inside or outside the home, heats water which can be used in hot water heating systems and, combined with a hot water storage system, can be stored for long periods of time (from seven to ten days) between firings.

To the best of our knowledge, some boilers are constructed to be used with a variety of fuels, including wood, oil, and gas, offering a lot of flexibility to the homeowner, particularly with the fluctuations in the availability and pricing of different fuels. Other boilers are designed to burn corn or wood pellets, and you should also know that two more fuels which are increasing in popularity as alternatives to traditional fuel oil or natural gas. To sum up, with more recipients waking up to the problems inherent in heating with oil and natural gas, people are looking with renewed interest at alternative sources of fuel for heating their homes; and more and more are choosing wood boilers as a safe, sensible, and sparing solution.

Read more about Biomass Boiler Guide and Biomass Boilers Information

Technorati Tags: , , , , , , , , , , , , , , , , , , ,